WebcamViewer – View your webcam on Window 7

If you ever use Window XP + Webcam, you probably know that you can view the webcam under My Computer, without any application or webcam software.

image

image

Unfortunately, under Window Vista and Window 7, this feature has been removed, and if you want to have a view on your webcam, you will need a webcam software. Therefore I decide to develop a very simple webcam software called WebcamViewer that enable you to have a view on your webcam. You can download the software from the link at the bottom of this post.

image WebcamViewer is a very simple click-and-run application, where you don’t have to install the application. Simply download the exe file and run the exe file to use the software. You can store it inside your harddisk or you can carry it in your pendrive, and run it on any PC you want.

The Interface is simple, the first thing you have to do is to choose your Webcam. At the top left of the interface, choose the appropriate webcam. Please take note that some user might experience having “Google Camera Adapter” under the list, which is not the real webcam, choose the correct one.

Untitled-1

After choosing the webcam, you will need to choose the desire resolution and refresh rate for the webcam. Click on the list at the right side of the webcam selector to view the available resolution and refresh rate for the selected webcam. For example “640×480 30” means that the width of the image is 640 pixel, the height of the image is 480 pixel and the refresh rate of the image is 30 frame per second. Please take note that the available resolution and refresh rate will be different for different model of webcam.

image

Now, click Connect, and you should have the live video from your webcam.

www.bustatech.com006 To disconnect, simply click Disconnect button or you can click the X at the top right of the window to close the application. To capture an image from your webcam, you can simply double click on the image, and the captured image will be store at the same directory as the exe file. A folder with the name of the webcam (Integrated Webcam in my PC) will be created at the directory of the exe file.image All the captured image will be stored in the “Integrated Webcam” folder, and the filename will be the date and time of the capture.image You can also use WebcamViewer to view more than one webcam at the same time. Simply run 2 copy of WebcamViewer (after having WebcamViewer running, simply double-click on the WebcamViewer.exe file AGAIN to have the 2nd copy of the application), and connect to different webcam on each copy of WebcamViewer.

www.bustatech.com009 Have a try!

Application Error

If you ever come across with this problem, “The Application failed to initialize properly (0xc0000135). Click on OK to terminate the application.”, you will need to install Microsoft .NET Framework to continue using this software. You can download Microsoft .NET Framework at the download link provided at the end of this article.

applicationerror

 

System Requirement

Supported Operating System: Window XP, Window Vista and Window 7

Required Software: Microsoft .NET Framework

Download

WebcamViewer V1.0.zip

Microsoft .NET Framework

266 thoughts on “WebcamViewer – View your webcam on Window 7”

    • Thanks for the almost FULL screen web cam viewer. I tried a few others… this one was the best… get a donate button!

      Reply
  1. dear sir, when i take a photo with my webcam i cannot find where it has been stored so that i can print it, can you please help with this problem.

    many thanks, a. dawson.

    Reply
  2. Hi there, the captured image will be stored at the same folder as the exe file. For example, if the WebcamViewer.exe is being located at your desktop, then a folder will be created at your desktop and the captured image will be stored inside the newly created folder. And for your information the name of the newly created folder will be base on the webcam name which you see at the webcam selector list.

    Reply
  3. My colleagues at work used one called booru webcam but it has not been updated for vista or win 7. It is pretty cool because it has a transparency feature on it and I believe you can set it to always be on top. May give you some ideas of functionality to add to your software. Thanks for developing it. Appreciate it.

    http://www.booru.net/download.html

    Reply
  4. Thanks for this program, very nice and easy to use.

    So feature ideas:
    The ability to set to “always on top”, an option to autoconnect to last connected cam and an option to
    run at startup would be some very nice features to add..

    Reply
  5. Very nice! I still have to start options in Skype though, to set shutter speed, light and so on. Would it be possible to reach the camera driver settings from inside WebcamViewer?

    Reply
    • Currently, it is not able to configure the camera driver using WebcamViewer. The only thing you can configure is the frame per second, but for the brightness, color and extra setting is still not added to WebcamViewer. And thanks a lot for the suggestion in all the features, more settings for the webcam will be available on the newer version.

      Reply
  6. Thanks, that was just what I was looking for 🙂 Can’t believe they’ve canned this simple functionality in Win 7… was sure I’d seen it when I started to dig thru’ Win 7, but that must’ve been memories of Win XP 😉

    Suggestions:

    As somebody have already mentioned before me it would be nice if it could grab video as well as pictures… mkv would be nice but even good old avi will do 😉

    Also it would be an obvious idea to be able to browse to wherever you’d like to save the picture/video. I’d personally prefer to be able to save to my desktop and not having to dig thru’ the folder on my flashdrive where I’ve installed it.

    Thanks again 😉

    Reply
  7. Thanks, this is a handy little app for simply viewing what your webcam is seeing.

    However, it seems to have memory issues. While viewing my Logitech C510 at 1600×896-24, memory usage by the app jumps up at about 100MB per second. Sometimes it will “reset” after a little bit and release a bunch of memory (i.e. jumped from 1.5GB down to 200MB) and other times it seems to just keep growing until Windows kills the app for me (I’ve seen it use over 2GB before I killed it).

    Reply
  8. I have a build in webcam on my laptop (hp pavilion) But i cant choose any webcam with this program. Its like the webcam doesnt exists. My webcam worked with vista but since i have win7 not anymore. He doesnt detect it all… 🙁

    Reply
    • Try to make sure that the driver for the built-in webcam is installed in your Window 7, install the driver and try to run the WebcamViewer again.

      Reply
  9. Well thats the problem. There arn’t any webcamdrivers available for win7. (hp pavilion dv6700)
    The last ones were for vista only… And device manager doesnt reconize my webcam at all. So maybe my webcam died?

    Reply
  10. Maybe i should try win xp to check my webcam there..
    (vista knows more webcam troubles, said HP)
    If it doesnt work in winxp either then… My webcam died..? :S

    Reply
  11. when i take a picture with webcam viewer, a box will appear saying unable to create file. and when i downloaded webcamviewer v.1.0.zip, there wasn’t any folder in my desktop. help?

    Reply
    • To get the captured photo, you will need to first find out the downloaded file. The photo will be stored together with the exe file. If you are having problem finding the exe file, maybe you can try to right click on the download link and select “Save Link As…” then your browser should pop out a directory browser that let you choose the directory to store the download file.

      Reply
  12. Would be nice if you could do multiple cameras on one pc. Especially if you have the same brand, model, vid/pid

    Reply
    • Yes, you can actually run multiple copy of WebcamViewer for multiple cameras. After you have one WebcamViewer running, double click on the exe file again to run the 2nd WebcamViewer, then you can use these 2 different WebcamViewer to connect to different webcam.

      Reply
  13. Great little app! Is it possible to have the src code? I’m working on a little project that takes a picture and sends it to my android phone.

    regards

    Andy

    Reply
  14. You guys are Awesome! Thanks for the time to make this and share with the rest of the world! I hope the rewards you receive for your efforts are worth it!

    Reply
  15. GREAT!!, it works really good, i was getting crazy looking for a way to use my webcam on Win7, your software is the one!!!

    Reply
  16. hello,
    I’m using a HP TX1000 laptop with windows7.
    And I’ve downloaded your software but, the problem i’m facing is that the list containing the camera names and the resolution options is EMPTY.
    please help me asap.

    Reply
  17. nice software works good……. solves everyones tention to view a webcam in win7 and vista

    thanks brother

    Reply
  18. 2nd webcam appears in dropdown list but says “unable to run camera may be in usr”

    Is it possible to run two? Iv’e tried double clicking to no avail.

    regards
    Tony

    Reply
  19. i found this very useful,but i am unable to view the pictures taken.everytime i have to get webcam viewer exe from winzip folder and when i dbl click photos it takes picture but i am unable to locate the file to find the pictures.help.

    Reply
  20. Hi there!

    Just got your app; it’s PERFECT! Easy to use, small, and requires very little setup. Here I thought the days of simple stand-alone applications were gone.

    Thank you!

    mnem
    I see you.

    Reply
  21. Great simple software. Just what I needed. I will be using it to monitor my kids in their playroom.

    Suggestion: I think someone else already had: have an option for it to be always “on top”.

    Reply
  22. Thanks, great work.

    For those who are interested:

    I have a Philips Toucam Pro. This wonderful cam has a spec far higher than many later, much more expensive, cams. Then I moved to Win 7 I discovered that Philips were not supporting 64 bit drivers for this excellent camera. They advised me to buy a new cam. No way ! The link below shows how to modify the X64 driver setup files for another Philips product to make it work with a Toucam Pro under Win 7.

    http://www.cloudynights.com/ubbthreads/showflat.php/Cat/0/Number/3862114/page/5/view/collapsed/sb/5/o/all/fpart/1

    So, the above link plus the great fuss-free viewer available here means that I don’t have to bin this great little webcam after all.

    Thanks again.

    Reply
  23. Thanks for the software.

    To all of those who are lost on how to get it so you can see the captured pictures , you must first extract the exe to a folder of your choosing and not just running the exe from within the archive. that should help.

    Reply
  24. Good shit!

    I was looking for something to replace DoorGem (old webcam app) which is just the same.. one tiny little exe file.

    Webcam software these days is just bloated and pathetic..

    i think your app is PERFECT!

    Reply
  25. hi also getting unable to create file when i take a picture with webcam viewer any ideas tried admin rights etc.

    Reply
  26. I’m using dell inspiron N5010 loaded with win 7 64bit. It has got some type of integrated webcam. I can see the driver fine in device manager but when I start your software and try connecting it shows device in use but it isn’t.

    Reply
  27. Hi!
    This is really handy, it solves a problem with some microscopes in our lab. Would you consider publishing the source under an open license like GPL, BSD?

    Reply
  28. Just what I was looking for. Win7 is pants, I’ve been round and round it trying to view my webcam with no result.

    Reply
  29. Awesome , …!! thank u very much ,..!! if u have any other more new such type thing so plz share it . and plz mail to me ..!!
    thank again..!!!

    Reply
  30. Show error, “Can not connect device. The device may be already in use”. I am using HP 6730b notebook ni which webcam is builtin. What should I do?

    Reply
    • Hi Tariq, I’m getting the same response. My Skype worked up until about a month ago. Have you found a solution since October?
      Thank you for any help,
      Perc

      Reply
  31. Great little ap.
    However, I cannot capture pictures.
    The picture folder was created but I get the error: “Unable to create file.”

    Reply
    • I think you have place the application under some protected folder. You can try to run the apps by right click on the apps and choose “Run as administrator” or you can try to move the application to non protected folder like My Documents or Drive D maybe.

      Reply
  32. Unable to create file.
    I’ve tried running it in c:/, and My Documents, and a folder I created under c:/. and I get the same error. “Unable to create file”.
    All locations have full rights for system, admin and user”me”. No other users are registered.
    The “USB PC Camera” folder is created at each location so I don’t think it’s a rights issue. But the captures are not saved. “Unable to create file”
    Running the exe “as administrator” doesn’t help.
    I am running Vista Home Premium SP2. I have Microsoft .Net 3.5 SP 1 installed.
    I’d be happy to help diagnose this issue. I believe other people have had the same problem.
    I appreciate your help.

    Reply
  33. FYI:
    My use case:
    I’m presenting in a web conference. I only have sketches on paper or a whiteboard. I COULD snap them with my iPhone and upload to my computer, one at a time, but how cool it would be to just point my iPhone to the sketch as I’m changing it and display that on my desktop with your neat little tool (in full resolution) and share my desktop on the web conference!

    Now (once you fix this issue) all I need is a little travel “tripod” for my iPhone! ; – )

    Reply
  34. Just want to say thank you for the posting (and exe) this has saved hassle trying to get some software from so called professional manufactures to work – gonna share this link with so many friends! cheers

    Reply
  35. Neat, thanks a lot! I needed some webcam app that I could keep small somewhere on my monitor. If you are looking for features to add then “keep the window always on top” option would be useful.

    Reply
    • That is common problem when the application is located under the folder that required administrator right to create file. You can either place the application at other folder that do not require administrator right or run the application as administrator.

      Reply
  36. We use a laptop and a beamer in church to display the lirics. Today we had a group of children performing, but de people in the back couldn’t see the children. A wanted to use the webcam and the beamer so everybody could see the children, but in Windows 7 there’s no program for the cam. Thank you so much for making this program. Next time we can use the cam!

    Reply
  37. Thanks this is a nice portable viewer and good troubleshooting tool. I’m surprised by the number of people that expect you to personally support it and solve all their problems as if your time has no value, yet you are still nice enough to answer quite a few questions. I liked the one that wanted you to “e-mail it to me” when there’s already a download link. Not to mention someone wants you to give them the source code. I hope you get quite a few donations, it’s certainly worth it.

    Reply
  38. Absolutely excellent. Been trying to get my USB microscope working ever since I switched to Windows 7 and this has fixed the problem in seconds.
    A brilliant program
    Thank you :o)

    Reply
  39. Great piece of software, thank you.
    Is there any way to
    a) Maintain webcam window over all other windows
    b) Show only the webcam image, not the window frame or the controls of the WebcaViewer
    It would be perfect for doing screencast…

    Reply
  40. can you do this for android, this might sound daft but there seems no way of actually just viewing your own webcam in android, in fact android tablets dont even recognise a usb webcam please help

    Reply
  41. Apparently i’m having the same problem. Folder is created, but ‘unable to create file’ is displayed whenever i double-click on the video. Using win7 x64. On all the x86’s i have tried it, it works flawlessly.

    Reply
    • Try to check the directory you store the application. In some directory, the application will requires administration right to create file. You can try to run the application with administration right, right click on the application and choose “Run as Administration”.

      Reply
  42. There is an even -easier- way to verify your web camera is working – Launch Paint and select ‘From Scanner or Camera’.

    Reply
  43. just visiting your page, got a avg warning about some infected php code on the site,,,, a pity on a page that offers a useful tool like yours…
    AVG identifies it as an exploit of your wordpress installation, unfortunately I closed the warning popop and it was not logged, so I cannot give you the name of the infected php file…

    Reply
  44. Thanks, really!
    Though I really do not understand why Windows 7 should not have the useful features of XP ….

    Reply
  45. Hey man great application. Im a videographer and just wanted to monitor my camera via a usb capture device. This works great so far. Just want to thank you for your time in building this and offering it for free. Thanks man. If you are ever in sacramento, ca i owe you a beer!!!

    Reply
  46. Hi there,

    Amazing piece of software, any chance we could get the source for this package to make adaptations ?

    Thanks in advance.

    JJ

    Reply
  47. Hi there! just want to say thank you for this! not only there is no hassle in using it , but it is also FREE. thank you for this.. it will help me a lot regarding security purposes here in my home.

    P.S if it is okay with you.. can you please send me the source code for this software? I want to be able to adapt your work and implement it with other softwares I want to develop.. thank you!

    here is my email :
    kelseys92@yahoo.com

    😀

    Reply
  48. Thank’s a lot. really love these small and powerful .exe programs that work without any instalation!!!
    I would very much like to be able to save a captured image in different formats, e.g. the simple .bmp. Could such an option be added??

    Reply
  49. This is a simple but useful application.
    I have to ask this:
    Can you please put this app as an Open-Source application?
    You would be like a hero.

    Reply
  50. This is very cool application , i used it with windows 7 for long time , but since a week it show error message that webcame viewer stop working , i try debug or other method but didnt helpful . i have netframe work 4.5 version so no problem about it .

    Reply
  51. Nice program!
    Could you maybe add an option to rotate the picture by say 90, 180 and 270 degrees?

    Thanks in advance

    Reply
  52. excellent work! does work and is very simple to use. i needed something like this to pair with join.me webcasting, but unfortunately, the developers did not include video conferencing, unlike cisco webex.

    the fact that only a few participants can join in webex limits my audience, that is why i switched to join.me that could handle way much more participants, albeit the lack of video. but with this, it makes up for it.

    thanks a lot! really appreciate your help! more power to you!

    Reply
  53. Awesome and simple. I can’t believe i had to spend about 2 hours searching for a “usb webcam app” and only found bloaded expensive apps. You’ve proved again that simple is better and newer is NOT better. This is AWESOME. Gracias.

    Reply
  54. You are brilliant!!! and thanks for your generosity too, it solved my problem in no time! Keep up the good work…

    Reply
  55. These past few years, on and off, I’ve been searching for simple webcam software that I can use to get quick snapshots off of my laptop’s integrated webcam. Every time I’d found one, there was SOMETHING I didn’t like or didn’t work. This is excellent. Thank you so much.

    Having said that-is this still in development?

    I hope you don’t mind me recommending a few features I think would make this perfect 😀

    -Option to disable shutter sound (I’ve simply muted it from the Windows volume mixer)
    -Re-sizing of image preview
    -Choice for saving directory/snapshot filenames
    -Device settings
    -Video recording

    Reply
  56. Olá,boa noite,gostaria de agradecer pelo programa..me ajudou muitoo..adoro tirar fotos e visualiza-las depois.Parabéns amigo!!
    Ahh só qria saber uma coisa..esse programa tbm serve para gravação de vídeo ?? Se serve,como faço para fazer um vídeo..Desde já agradeço >.< ^^ bjsss

    Reply
    • Hi, I am sorry to say that the current version of this software do not support video recording. Video recording will be considered in the newer version of the software. Thank you.

      Reply
  57. Works on Windows 8 (desktop mode) with the little bit of testing I have done thought the built in Camera app works pretty well too.

    Reply
  58. Amazingly simple and effective piece of software. I am using Techsmith Snagit and wanted to add a small thumbnail with live video from my webcam during my presentations and on your website I found exactly what I was looking for. Thank you so much !!!

    Reply
  59. Hello,
    the WebcamViewer is a nice software, but by full hd (1920×1080 30fps) crashes the software with an error: not enough memory under Windows 7 32bit.
    Regards
    Superior

    Reply
  60. Simple option needed – autoconnect on startup – then one could see through camera just by opening/closing the app without additional connect button press

    Reply
  61. Finally ! A simple and efficient software which works (I think it doesn’t need more options ) ! I found it o/ (after 3 years :p) Thanks a lot.

    Reply
  62. Very cool… Maybe a $5 version with no frame and an option for always on top… This way the view would be on top of a Powerpoint presentation and look clean… That would be VERY cool. Thanks… Please email me if/when you do this…

    Reply
  63. Hello
    Thank you for this simple but special software.
    I had a project for my university in which i will use a similar functions, but with two cameras. The problem is that when i choose the desired camera, conflicts occurs and the capture window is destroyed.
    Can u please help me with the main functions to use or if u can give me the VB source code so i can compare between the two codes.
    I can pay for this code but please i need some help.
    Regards

    Reply
  64. Thanks for such a great, simple program. Any way you could add an option to hide the window controls and margins? Essentially making it just a resizable video window on the screen?

    Thanks again!

    Reply
    • Just to echo what has been said, the program is a really good easy to use solution. The ability to hide the margins however would be really useful for my particular need. We are trying to capture 2 webcams at the same time and screen capture the result. Having the ability to switch off the margins would make the join really seamless and look more professional. Would this be a possibility in a future update?

      Reply
  65. Where does WebcamViewer look for installed webcams?

    WebcamViewer adds a blank location in the drop-down menu for my webcam.
    [ ] Blank area
    [ Chicony USB 2.0 Camera ]

    On other Windows XP computers, WebcamViewer finds the webcam by default, but on my system I have to manually search for it.

    Does anyone have any ideas?

    Reply
  66. Fantastic, just what I needed… and great that it works in Windows XP too. My device manager fails to see my webcam properly and I get a ‘preview failed’ error, but WebcamViewer worked a treat! Many thanks for making this free software.

    Reply
  67. Hi
    what a Great app!
    Quick Q: I would like to make the window even smaller. is it possible to make it smaller than 176×144 30? can i choose another combination, or ?
    thanks

    Reply
  68. Many many thanks for this program. Been looking for a simple webcam viewer and your program is perfect. Looking forward to a new version. Dave.

    Reply
  69. Please add command line switches for camera and resolution selection.
    Also full-screen mode will be great 🙂

    Reply
  70. First: THANK YOU. I really needed exactly what you made, here. (I’m using it to view a webcam that I shove through a small hole in my ceiling, to peer into a crawl-space. I’m rewiring my house.)

    My feature requests, and suggestions:
    1) I can guess why you don’t want to have to remember any settings. Indeed, the portability of this viewer, and the lack of an “Install” ritual, are rare and valued. But I’d welcome even a single-session-only ability to specify the location of the screen-shot folder.

    2) Probably pretty easy: the ability to flip (mirror) the image. Also to rotate.

    But I have no right to make any demands. I’m primarily posting to express my respect and gratitude.

    PS: It works GREAT in both Win-7 (x64) and also Win-XP (yes, XP, because XP’s built-in viewer gives only a small, low-res image).

    PPS: Your website gave me a one-time-only error, (roughly) CAPTCHA token file unreadable. Just FYI.

    Reply
  71. Hey, i just want to know if i use this program am i the only one who see this? or this program transmits the view/movie for someone in the internet?
    Thank u very much:))

    Reply
    • Hi, the application only display the webcam image on your screen, no other people can view it. You can check your internet data transmission while running the application to make sure that there is no data being transferred to internet from the application.

      Reply
  72. I love the application! It does exactly what I need. Short, simple, and to the point. No endless features, just the clean cut essentials. I’m actually working on a similar program and having some issues with connecting to the webcam on USB webcams running the usbvideo.sys driver. If you could e-mail me at js7289@yahoo.com and would be willing to offer a little help with connecting to the webcam or if you would be willing to send the source code, I would greatly appreciate it. Thanks.

    Reply
  73. Hi! first of all, congratulations for your program, is simple and easy to use!

    I am using the program Webcam viewer v1.0.0.0, but it appears a memory error when I use the program with a HD Webcam.

    This error appears both in WinXP and Win7 x32 (this last with a intel I7 and 4gb memory).

    I noticed that when the program is running with a resolution of 1024 x 576 @30fps and above, it appears an error related to the .Net Framework. It says that there is insufficient memory. From lower resolutions the program works well

    With resolutions of 1024×576 takes about 30 seconds to appear the error
    With resolutions of 1280×720 takes about 15 seconds to appear the error
    With resolutions of 1920×1024 takes about 5 seconds to appear the error

    I checked the amount of memory that the program uses and I realised that the memory increases more and more till the PC cannot work.

    With resolution of 1920×1024 my Intel i7 PC gives the error when webcamviewer arrives at 2.8GB of RAM memory.

    it is possible to solve this? I think that the Webcamviewer does not manage properly the use of RAM memory. If you do not mind,can I ask the source code?

    I attach the screen captures of the error and a Word document with the description of the error code:
    https://dl.dropboxusercontent.com/u/27379076/Message%20Webcamviewer.rar

    Thank you very much

    My adress is trespots@gmail.com

    Reply
    • Thank you for using WebcamViewer. We are actually aware of the memory issue for the application. We are working on the solution for that error, and hopefully it can be fixed in the newer version of the application. Thank you.

      Reply
  74. hello, i cant find a way to contact you via email, but i was wondering how far away a v2 of this great lil app is, because for the systems ive tried it on, it cycles on memory usage, so it will use all available memory, even on a 12gb system itll take over 10gb of it and then cycle back down and roll slowly upwards again, in 5 minute cycles, so that other programs dont have memory to use. thanks again, i look forward to a future version where it just uses a moderate amount of memory…

    Reply
  75. Great little program, lets me check my webcam and even allows me to take a picture. Who can ask for more?

    Well, one can ask for more, but then the program wouldn’t be 180K. Love it. 😀

    Reply
  76. I couldn’t find an application quite like as simple as this anywhere else. However the memory consumption is a problem. Is there a paid version that doesn’t have such an issue? I don’t need more features just something slim, simple, low footprint and will be easy to deploy to several hundred people. Please contact me if there is a paid version or a bounty to create this bug fix.

    Reply
  77. Hi, I keep getting the message “Cannot connect device. The device may be in use” I have no other programs that use a webcam. Win7, 1.5 year old Dell desktop, if I try all the different resolutions it will finally connect, how can I connect the viewer to the webcam right away?

    Reply
  78. Hi, I have been having an issue with the video feed freezing or skipping running on my Windows 7 – 32 bit system. Is there any suggestings for how to fix this?

    Reply
  79. Two enhancements:
    – Would be great if you could add a “full screen” button.
    – Resolution of 1024/768 is also nice to have. Most beamers support this.

    Reply
  80. Wow that’s very useful and easy to use it, but i need to improvement adding for the sound features. Thanks. d(‘_^ o)

    Reply
  81. hola mi nombre es luis reyes y me dirijo a ustedes debido a que no encuentro la aplicacion de web cam , y como consecuencia no la puedo usar . segun lo que me comunica la webcamviewer es una aplicacion de escritorio y debo dirigirme a http://www.bustatech.com , una vez estando ahi descargo la aplicacion y todo el proceso normal pero sigue sin reconocerlo mi equipo , segun datos de la aplicacion no contiene ningun requerimiento .
    por lo cual me dirijo a ustedes para saber como puedo utilizar mi web cam , no se si tenga que ver el windows , el mi laptop es windows starter 7 tendra algo que ver oh que debo hacer .
    sin mas por el momento y esperando una pronta respuesta , quedo a sus ordenes .
    atte
    Luis Reyes

    Reply
  82. Hi, nice aplication!
    Can I ask you what kind of dll have used to get webcam?
    I have developed an application that should intercept the web cam and instead remains a black screen.
    Your application instead work very well.
    I have used C# and avicap32.dll, and you?

    Thanks

    Reply
  83. Software works great, but I need a hands off launcher for this program. I want to be able to start your program from the command line , have it automatically connect to a camera and position the view window at a specific place on the screen. For example with parameters instead of button clicks, for example:
    WebcamViewer.exe -c1 -s2 -x100 -y50

    where with the above parameters the program will automatically connect when started to the first camera in the list, at the size specified by the second choice in the second drop down box, and the view window is positioned at (100,50) of the screen.

    Reply
  84. Hola yo tengo esa camara y funcionaba perfecto , ahora me veo pero al dar doble click no capta la imagen me señala un error en windows32 que puedo hacer puede ayudarme por favor

    Reply
  85. Well done! Nice little utility. I miss that cam feature from XP.
    You’ve gotten some good feature suggestions, like the command line params, and I ‘d like to suggest the ability to take a capture by pressing a key in addition to the double click thing.
    But what I’m really post to ask you is if you would consider releasing the source code for this app!

    Reply
  86. I love a simple straight forward program. works great for viewing, however I can not capture an image. the folder is created, but an “unable to create file” message is returned. thanks

    Reply
  87. Nice Post.. Thanks For Sharing this. i really like this. you made my Day 🙂 hillirius.. i also like your theme this is so light, nice work keep it up..

    Reply
  88. hi, i have a problem when trying to capture a photo because it says ‘unable to create a file’ help please. Thanks

    Reply
  89. Great little viewer with ability to capture and save still image.
    However it would be even better, if the program be updated to capture and save video as well…
    Guess this will then be a complete app.
    TQ

    Reply
  90. Hi ! Found this with Google.
    Just what I needed to focus a baulky new Kinobo USB B3 HD webcam whose free utility software refreshed the preview image *too slowly* under Win 8.1u1 to enable precise manual focussing.
    Thanks to you, it is ‘Job Done’ !!

    Reply
  91. yo tengo la camara en mi laptop, antes funcionaba bien, pero mi laptop fallo y cundo me la devolvieron de arreglar, la camara web, ya no funcionaba, me entra la aplicacion pero no dice: bisomcam, ni las resoluciones, en fin ya no me funciona…

    Reply
  92. Great app for basic webcam testing.

    I’m noticing the memory cycling also. Normally it’s taking about 400M but if you minimise it or take away focus it goes into this runaway mode where it uses all available memory. Not really an issue if you’re using the app for it’s intended purpose.

    Reply
  93. i have installed new window 7 and cannot instal webcame viewer softwear and when i try to intall framenetwork softwear message shown that already installed as part of your os.but my came is not working on dell lattitude d620

    Reply
  94. What would be nice is if there were a way to simply present the video in a frame without seeing anything other than the video.

    Additionally, allow just rescaling the video to fit the frame size.

    Reply
  95. This is a great little program. I use this to monitor video sent from a wireless spycam mounted on a robot. The camera receiver is connected to an easycap and viewed with WebcamViewer.

    Thanks for this handy, lightweight tool.

    Reply
  96. This is a nice and useful start.

    Feature requests for v1.0.0.0: add settings for location of captured file (putting it in a folder next to the binary is a terrible idea on my setup) and for muting the sound.

    Thank you!

    Reply
  97. Hi there! Thanks for the application. Just what I was looking for.

    I have three suggestions.
    – having an option to start the web cam on launch
    – mirroring
    – possibility to go full screen, most preferably by hitting [F11]

    Reply
  98. I really like using version 1.0 because it’s just a simple webcam image box without all the other functions embedded into the box, which creates clutter around the periphery.

    For my purposes, I need to be able to resize the webcam image box/window however I like and move it to where I want while I teach online from lessons scanned into a PDF file, and WebcamViewer allows me to do just that.

    WebcamViewer allows me to place the webcam box right next to the PDF file. But more ideally, I would like to place the webcam box right on top of the PDF file in the upper left corner while I’m scrolling within the PDF file. Is there a way to make the webcam box always stay in front?

    Reply
  99. thanks it works. but i have no folder. no integrated webcam folder. a search on files modified today finds no
    pictures, even though i took several snaps. the screen paused. but nothing captured can i find.
    thanks.jim

    Reply
  100. hi!i just used version 1.0. its working great but i cant find the folder where the images must have been stored. can sum1 help??

    Reply
  101. This WebcamViewer 2.1 is blocked by my virusscanner saying that it is potentially harming my computer.
    Please react.
    Thank you

    Reply
  102. Thanks! Very useful. I have noted that after running for a while, it will report an unhanded exception and I’ll have to quit and restart. It might be my power savings scheme because it doesn’t happen often if I am actively using the computer.

    Reply
  103. Nice work! I may have found an important issue though. There is a memory leak that occurs when the viewer is occluded behind another window or also when the viewer is minimized (anytime the viewer is connected and its window is not visible). It then consumes memory without releasing it until all available system memory is used. Otherwise it looks like the program consumes memory steadily, but then releases it at regular intervals and my system (Windows 7) stays stable.

    Otherwise, great app. Since Windows 7 eliminated direct viewing of USB camera’s video streams via Windows Explorer (USB cameras used to appear in My Computer and could be used without 3rd party software), a good lightweight USB camera viewer is needed and VLC just doesn’t fit the bill :).

    Thanks!

    Reply
  104. It works on my desktop but on on the laptop that already has a camera built it. When I try to connect to a second USB camera I get the message cannot connect because the device is in use, which clearly is an error. I checked the USB driver for the camera – no error messages. I am not having this problem when I use the same camera and same software on my desktop Any suggestions?

    Reply
  105. Handy bit of software. would love to be able to keep it on top of all the windows. Any idea how i would do that?

    Reply
  106. Greetings! I’ve been following your web site for a long time now and finally got the courage to go ahead and give you a shout out from Lubbock
    Tx! Just wanted to say keep up the excellent work!

    Reply
  107. Hi all, the version 2 having quite number of problem. Now building new version totally overhauled version. Coming soon stay tuned. V2 not compatible with all type of computer. Sorry for the delay , working on something else.

    Reply
  108. As this is one of my “USB toolbox” programs, I am glad to hear you may perhaps grace everyone with another version of this simple utility. The 1.0 version has worked just fine for a long time. And has assisted with many quick fixes for me. Good luck with all your projects!

    Reply
  109. Great app! Exactly what I was looking for. Sadly version 1 does not support borderless fullscreen mode and the other two versions don’t seem to work with my camera. Version 2 says, that the selected resolution is higher than the screen resolution and version 3 says, that the hardware does not support snapshot and won’t disply any picture… Version 1 is still the best. Anyway you can implement the fullscreen mode into that version?

    Thank you very much!

    Reply
  110. It is a great software. Can you provide an option to keep the window on top in the left upper corner. This would be very useful to project the speaker’s live video during a live powerpoint presentaion.

    Reply
  111. Incredible my friend. I’ve been looking for an app like this for a while but no luck. I think it would be even greater if this can record video. Anyway excellent job!

    Reply
  112. Lots of rave reviews for an efficient web cam viewer. The small file size is a plus. There are quite a few apps that use the .Net framework but I would prefer not to have the overhead so ver. 1 works for me.

    Cheers… Alex

    Reply
  113. Add me to the list of folks that would really use an Always on Top option.

    Installing another program to do it is not an option with the locked down work systems.

    Reply
  114. i am using your software before but now its not working again how could i used it as smoothly as i did before? please help me i had downloaded your recommended software but it doesn’t work either.. sad

    Reply
  115. Great job! This is exactly what I’ve been looking for! I lost the software for my endoscope cam. And who would believe, it runs whiteout any problems under windows 10!

    Reply
  116. Thanks, at work we run a special version of Win 10 at work that does not have the “Camera” app installed. I needed something like that for troubleshooting and this little thing works like a charm. Portable, simpel, works with Win10, great little piece of software.

    Reply
  117. Hi, I see there are a few comments around wanting to show the camera image full screen with no border – was this ever resolved? Can it do this or do you have a work around to make it full screen with no controls showing? (particularly good if using the camera feed to cast out)

    Reply
  118. I use this in conjunction with a re-purposed “IIWEY” dashcam that I’ve set up in my garage so I can remotely read my energy consumption (electricity & gas) meters.
    Works perfectly with a Samsung N150 running Win7Pro.
    Your program is simple; efficient; effective.
    Thank you for making it available.

    Reply
  119. I am trying to use this with a Logitech c922 to show over OBS software. Every time I chose the device and hit start it closes. I have reinstalled and rebooted.

    Reply
  120. 2024 , I download this on all laptops i get because that windows junk is sus and now they started putting boxes around your face tracking rather than just showing the camera.

    personally used on dozen+ systems

    Reply
  121. Great piece of software.

    When viewing my webcam on XP, the native viewer uses “video overlays”, which prevents the image from appearing on screen shots. All I get is a sea of black.

    You program fixed this simply and easily.

    Reply

Leave a Comment